An unlevel swimming pool can be a frustrating and potentially dangerous problem. If your pool is not level, it can cause the water to drain unevenly, which can lead to leaks or collapse. It can also make it difficult to swim and enjoy your pool.

Image: openwaterhq.com

Fortunately, fixing an unlevel pool is not as difficult as it may seem. With the right tools and materials, you can get your pool back to level in no time.

Step 1: Gather Your Materials

Before you begin, you will need to gather the following materials:

• A spirit level
• A tape measure
• A shovel
• A tamper
• Crushed stone
• Sand

Step 2: Determine the Extent of the Problem

The first step is to determine the extent of the problem. To do this, use a spirit level to measure the pool from side to side and from end to end. The pool should be level in both directions.

If you find that the pool is unlevel, you will need to determine how much it is out of level. To do this, measure the distance from the highest point of the pool to the lowest point. This will tell you how much you need to raise or lower the pool.

Step 3: Remove the Water from the Pool

Once you have determined the extent of the problem, you will need to remove the water from the pool. To do this, use a submersible pump to pump the water out into a nearby drain or ditch.

Be sure to remove all of the water from the pool. If you leave any water in the pool, it can make it difficult to raise or lower the pool.

Image: www.tiltedconcrete.com

Step 4: Excavate the Pool

Once the water has been removed, you will need to excavate the pool. To do this, use a shovel to dig around the perimeter of the pool. Be sure to dig down to the bottom of the pool.

As you excavate the pool, you may encounter obstacles such as rocks or tree roots. If you do, you will need to carefully remove them. Be careful not to damage the pool liner.

Step 5: Level the Ground

Once the pool has been excavated, you will need to level the ground. To do this, use a tamper to compact the soil. Be sure to tamp the soil evenly so that the pool does not settle unevenly.

If you find that the ground is not level, you can use crushed stone to fill in low spots. Be sure to tamp the crushed stone evenly so that it does not settle.

Step 6: Raise or Lower the Pool

Once the ground has been leveled, you can raise or lower the pool. To do this, use a pry bar or a jack to lift the pool. Be sure to lift the pool evenly so that it does not tilt.

As you raise or lower the pool, use a spirit level to check the pool level. Be sure to level the pool in both directions.

Once the pool is level, you can backfill the soil around the pool. Be sure to tamp the soil evenly so that the pool does not settle unevenly.

How To Fix An Unlevel Inground Pool

Step 7: Refill the Pool

Once the pool has been leveled and backfilled, you can refill the pool with water. Be sure to fill the pool slowly so that the water does not damage the pool liner.

As you fill the pool, use a spirit level to check the pool level. Be sure to level the pool in both directions.

Once the pool is full, you can enjoy your newly leveled pool!